Ring Sizing Guide
*Sizes & dimensions are approximate.
Make sure your printer is set to 100-percent. Do not reduce the print size in your printer ‘page
setup’ area. You can verify that the ring sizer printed correctly by measuring it with a ruler; it should
measure 3 1/2 inches long from "A" to "B".
To open the print dialog box, press CTRL + P for pc or COMMAND +P for mac.
Use a quarter to
make sure this page
is printed at the
Method A: Measure Your Finger
1. Cut out the ring sizer.
2. Cut a slit for Slot "A".
3. Wrap the sizer around the finger where the ring will be worn. Make sure the numbers are facing out.
4. Pull the pointed end Tab "B" through Slot "A"until the sizer is snug. Make sure to allow size for your knuckle. If your
knuckle is size in between the two.
5. The number aligned with Slot "A" is your ring size.
6. If the measurement lands between two numbers, your size is a half size.
Example: If your measurement falls between 5 and 6, your ring size is 5 1/